babybeam7 logobabybeam7 pikto

babybeam7 logo

babybeam7 front

BabyBeam 7

The EHRGEIZ LED BabyBeam 7 is equipped with seven high power 30 Watt RGBW LEDs by Osram®. This fixture is build for outdoor applications and is IP65 certified. There are also 20°, 40°, 60° and 60°x10° diffusor plates available which can be fixed easliy at the front.



  • 7 x 30 Watt RGBW Osram® LEDs
  • 20°, 40°, 60° & 60°x10° diffusion filter
  • IP65 classification
  • powerCON TRUE1 / 5pol DMX
  • Very compact housing

Piktogramm Garantie 

SteadyColor™ Dimming


The advantage of the RGBW LED technology is mixing every color to get a wide variety of colors. Furthermore it is a challenge to remain the same mixed colors also if the total brightness changes, because the single color-LEDs have different brightness and cannot be simply dimmed linearly. With the new EHRGEIZ SteadyColor™ Technology we enable the mixed colors to remain the same at each dimming level. No more color shifts by dimming in unwanted shades or adjustment of the single colors.

Quality Colors


The BabyBeam 7 uses the well-established and powerful 30W Osram® Ostar RGBW LED. The primary colors (red @ 632nm, true green @ 520nm and deep blue @ 453nm) create a very wide color gamut. All fixtures are calibrated to achieve an equal lighting output for every fixture.

ConsistentColor™ Optic


The BabyBeam 7 optic is unique and specially manufactured. An incredible beam of 6° and although a uniform color reproduction of the figure. The new EHRGEIZ ConsistentColor™ optic leaves nothing to be desired and represent the perfect balance between output and homogeneity. With this optic there are no longer coronas or color shifts.

  • Light Source
    • 7 x 30W Class RGBW LED
    • LED Life Expectancy: approx. 20.000 hours

    Optical System
    • ConsistentColor™ Optics
    • Beam angle 6°

    • RGBW, 8 bit or 16 bit color mixing
    • SteadyColor™ Dimming
    • Seamless CTO
    • Virtual color wheel with 39 colours including whites (2.700 K, 3.200 K, 4.200 K, 5.600 K, 7.200 K and 8.000 K)
    • High resolution dimmer 0–100%
    • Selectable dimming curves
    • Strobe with variable speed (max. 20Hz )
    • Pre-programmed random strobe & pulse effects

    • Maximum ambient temperature: 45 ° C (113 ° F)
    • Convection cooled
    Control and programming
    • Setup and addressing via OLED display with 4 buttons
    • Protocol: USITT DMX-512
    • Control channels: 2,3,4,5,6,8
    • 6 DMX protocol modes
    • 3-editable programs, each up to 30 steps
    • DMX In/Out: XLR 5 pol (IP65)
    • Power In/Out: Neutrik powerCON TRUE1

    Electrical Specification
    • Electronic switching power supply with auto-sensing
    • Input voltage: 100–240V AC, 50/60 Hz
    • Max. power consumption: 220 W

    • Centered Ø12mm hole in bracket
    • Preparation for one omega bracket
    • 1 attachment point for safety wire
    Mechanical Specification
    • IP65 rating
    • Height including bracket: 287 mm (11.29")
    • Height without bracket: 210 mm (8.26")
    • Width: 237 mm (9.33")
    • Depth: 166 mm (6.53")
    • Weight: 7.7 kg (16.97 lbs)

    Included accessories
    • Adapter Schuko to powerCON TRUE1
    • IR Remote Control
  • babybeam7 1   babybeam7 2   babybeam7 3
  •   Code 200255 - Case for 8x BabyBeam 7